Anti Bird Spikes installation Guide

Anti bird spikes is a very effective way to avoid having birds perch or nest, whether the gutters, window sills or walls. Our pigeon spikes are very flexible. It can adapt to all surfaces, even round surfaces

Installation Instructions

We want to show you how easy it is to get your pigeons plague under control with the help of the following guide:

Before starting the installation, you should consider a few points:

• Remove the pigeon droppings from the surfaces to be protected. Make sure you have work best with gloves, goggles and a mouth guard.
• Make sure that the surface is dry, clean and flat, clean if necessary with a (steel) brush.
• Ensure a safe workplace by a sturdy ladder or scaffold.
• Make sure that the distance between the wall or window mounted pigeon spikes and not more than 50–65 mm, otherwise pigeons fall behind it.
• For wider areas, you can mount several pigeon spikes parallel.

In just two simple steps pigeon control spikes are mounted.

Step 1: Apply adhesive

• Make sure that the surface is safe clean and dry.
• The adhesive to the protected area applied with a pressure gun.
• Apply the adhesive in finger width (about 6–12 mm).

Step 2: Attach the pigeon spikes

• Insert the plastic strip on which the plastic spikes are mounted centered on the glue line.
• Press the plastic strip firmly and secure it in place.
• A simple and effective measure.

Note: Anti-bird spike also can be installed with nails, screws or ties. The flexible base strip are versatile installed on straight, curved or uneven surfaces.